Common Elements is not a law firm and does not provide legal services. Plain-English summaries, topic guides, and synced statutory text help you find the right citation faster. Always confirm the current official version on the official Pennsylvania sources linked from each chapter before relying on any citation.
(a) General rule.-- Plats and plans are a part of the declaration. Separate plats and plans are not required
by this subpart if all the information required by this section is contained in either
a plat or plan. Each plat and plan must be clear and legible. The plats and plans
must contain, on the first page of the plats and plans, a certification that all of
the plats and plans contain all information required by this section.
(b) Contents of plat.-- Each plat must show all of the following:
The name, location and dimensions of the planned community.
The location and dimensions of all existing improvements.
The intended location and dimensions of any contemplated improvement to be constructed
anywhere within the planned community labeled with "MUST BE BUILT" or "NEED NOT BE
BUILT." Contemplated improvements within the boundaries of convertible real estate
need not be shown, but, if contemplated improvements within the boundaries of convertible
real estate are shown, they must be labeled "MUST BE BUILT" or "NEED NOT BE BUILT."
The location and dimensions of any convertible real estate, labeled as such.
The location and dimensions of any withdrawable real estate, labeled as such.
The location and dimensions of any additional real estate, labeled as such.
The extent of any encroachments by or upon any portion of the planned community.
To the extent feasible, the location and dimensions of all easements serving or burdening
any portion of the planned community.
The location and dimensions of any vertical unit boundaries not shown or projected
on plans recorded under subsection (c) and that unit's identifying number.
The location with reference to an established datum of any horizontal unit boundaries
not shown or projected on plans recorded under subsection (c) and that unit's identifying
number.
The location and dimensions of any real estate in which the unit owners will own only
an estate for years, labeled as "leasehold real estate."
The distance between noncontiguous parcels of real estate comprising the planned community.
The location and dimensions of limited common elements, including porches, balconies
and patios, other than parking spaces and the other limited common elements described
in section 5202 (relating to unit boundaries) not shown on plans referred to in subsection
(c).
All other matters customarily shown on land surveys.
(c) Contents of plans.-- To the extent not shown or projected on the plats, plans of every building that contains
or comprises all or part of any unit and is located or must be built within a portion
of the planned community, other than within the boundaries of any convertible real
estate, must show all of the following:
The location and dimensions of the vertical boundaries of each unit, to the extent
those boundaries lie within or coincide with the boundaries of the building in which
the unit is located, and that unit's identifying number.
Any horizontal unit boundaries, with reference to an established datum not shown on
plats recorded under subsection (b), and that unit's identifying number.
Any units that may be converted by the declarant to create additional units or common
elements under section 5215 (relating to subdivision or conversion of units), identified
appropriately.
The location and dimensions of limited common elements, including porches, balconies
and patios, other than parking spaces and other limited common elements described
in sections 5202 and 5209 (relating to limited common elements) not shown on plats
recorded under subsection (b).
(d) Horizontal boundaries of unit partly outside building.-- Unless the declaration provides otherwise, the horizontal boundaries of part of a
unit located outside of a building have the same elevation as the horizontal boundaries
of the inside part and need not be depicted on the plats and plans.
(e) Converting or adding real estate.-- Upon converting convertible real estate or adding additional real estate taking action
under section 5211 (relating to conversion and expansion of flexible planned communities),
the declarant shall record new plats for that real estate conforming to the requirements
of subsection (b) and new plans for any buildings on that real estate conforming to
the requirements of subsection (c). If less than all of any convertible real estate
is being converted, the new plats must also show the location and dimensions of any
remaining portion.
(f) Converting units.-- If a declarant converts any unit into two or more units or limited common elements
or both under section 5215, the declarant shall record new plats and plans showing
the location and dimensions of any new units and limited common elements thus created,
as well as the location and dimension of any portion of that space not being converted.
(g) Alternative recording.-- Instead of recording new plats and plans as required by subsections (e) and (f), the
declarant may record new certifications of plats and plans previously recorded if
those plats and plans show all improvements required by subsections (e) and (f).
(h) Who may make certifications.-- Any certification of a plat or plan required by this section must be made by an independent
registered surveyor, architect or professional engineer.
(i) Land development plans.-- Final plans filed with and approved by a municipality in connection with any land
development approvals may serve as plats and plans required under this section if:
all of the contents required under subsections (b) and (c) are contained either in
such final plans or in the declaration by specific reference to such plans;
such final plans have been recorded; and
a certification in accordance with subsection (a) is recorded and the certification
specifies the recording information for final plans.
Synced from the Florida Legislature’s official site. Verify the current version before citing.
Does your association comply?
Run your governing documents through the compliance scan. It checks them against the rules that apply in your state.
Common Elements is the platform for the community association industry, centered on the associations themselves: the record of each association, the people and professionals who live in, run, manage, and serve them, and the tools, data, and education they use to work together. It complements the management and accounting software you already use; it does not replace it.
Reference only. Not legal advice. Verify current text at the official state legislature website before citing. Printed from Common Elements (November 18, 2026).
Governing documentsKeep your CC&Rs, declarations, bylaws, and rules in a private library. Upload documents and search their indexed sections.